9.2.4.6. Extricom

9.2.4.6.1. EXSW Wireless Switches (Controllers)

To have the Extricom controller working with OpenNAC Enterprise, you need to define two E:term:ssid definitions, one for the “public” network, and one for the “secure” network. This can be done under a very short time period since Extricom supports out of the box RADIUS assigned VLANs.

You first need to configure you RADIUS server. This is done under the WLAN Settings → RADIUS tab. Enter the OpenNAC RADIUS server information. For the E:term:ssid configuration. in the administration UI, go to WLAN Settings → E:term:ssid definitions. Create the profiles considering the following:

Public SSID

  • MAC Authentication must be ticked

  • Encryption method needs to be set to None

  • Select opennac as the MAC Authentication RADIUS server (previously added)

Secure SSID

  • Encryption method needs to be set to WPA Enterprise/WPA2 Enterprise

  • AES only needs to be selected

  • Select OpenNAC as the RADIUS server (previously added)

The final step is to enable SNMP Agent and SNMP Traps on the controller. This is done under the following tab in the administrative UI: Advanced → SNMP